Trans Instruments (S) Pte Ltd

5 Jalan Kilang Barat #06-04/05 Petro Centre 159349 Singapore ,
Phone:

WalkLAB Microprocessor pH meter HP9000

Ease of use
Automatically locks reading when a stable reading is established. This feature can be disabled to allow continuous reading display.
    
Automatic shut-off
Meter automatically shuts off after 5 minutes after the last key command. This feature can be disabled while reading in continuous read mode.
    
One-touch calibration
The meter’s one-touch auto-calibration procedure uses only one button to activate the mode. The unit will prompt and confirm offset and slope point calibration.


 

 

 

Technical Specification

Technical Specification

Specifications

  pH mV Temperature
Range: 0 to 14 pH ± 999 mV 0 to 100°C
Display Resolution: 0.01 pH  1 mV 0.1°C
Accuracy (machine only): ± 0.01 pH ± 1 mV ± 0.5°C
Temperature compensation: Automatic or manual from 0 to 100°C
Operating Temperature: 0 to 50°C
Operating humidity: Maximum 90% relative humidity
Slope recognition: ± 20% at pH 4 and pH 10
Offset recognition: ± 60 mV at pH 7
Input impedance 10¹² ohms
Battery type: DC9V (1604A, 6LF22 or equivalent)
Battery life: Approximately 200 hours
Size: 164 x 83 x 35mm
Weight: 350gm (main unit including battery)
Click to download Instructions Manual

 

Standard Accessories

Standard Accessories

1. HP9000 - Main instruments
2. PP5003 - Plastic body combination pH electrode
3. PT9000 - Temperature probe (Stainless steel)
4. SP0701N - CAL pH7.00 Standard pH buffer solution 90ml
5. SP0401N - CAL pH4.01 Standard pH buffer solution 90ml
6. Hard Carrying case
7. Operation manual

Optional Accessories

Optional Accessories

1. PO5106 - Plastic body combination Platinum ring ORP electrode
2. SP1001N - Buffer solution pH10.01 90ml