Senz TDS 2 (100-10000 ppm)

The Senz TDS 2 is designed for liquid testing where high concentrations of below 10,000 ppm is measured. The Senz TDS 2 is both rugged and accurate.  TDS readings are converted from conductivity with the factor of 2 which is an industrial standard for water testing.  All readings are temperature compensated to 25ºC, a must for concentrated liquids.  The Senz TDS 2 is used to measure condensate, boiler water, swimming pool water and industrial waste control etc.

Precision
Precise display of 10 ppm over the scale of 0 to 10,000 ppm.

One-Touch Calibration
On activation, the tester calibrates the end-point automatically at prescribed standard solution.

Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording.

Hold Function
Able to freeze display for ease of reading and recording.

Beep Function
The tester beeps at every press of the button and beeps on every completed function and end-point reading.