Trans Instruments (S) Pte Ltd

5 Jalan Kilang Barat #06-04/05 Petro Centre 159349 Singapore ,
Phone:

Crystal Shrimp Pro

Crystal Shrimps are a delight and are highly priced as pets.  They are a challenge to aquarists and hobbyists due to their sensitivity to water conditions.  The Crystal Shrimp Pro is specially designed for the successful keeping of Crystal Shrimps. 

The market commands a high price for these shrimps as the red signature takes a few generations of selection due to the breeding cycle.  Another reason for the high price is transportation and express quarantine due to sensitivity of water conditions. Usually after transportation, a high percentage would not survive.

The Crystal Shrimp Pro is dedicated to measure the important water softness and temperature.

Why do we test water softness?
Water softness is an important parameter for crystal shrimp.  Caridina family like Bee Shrimp, Amano Shrimp, Red Cherry Shrimp etc. have similar requirements.  Although these shrimps can survive well in moderately hard water, they cannot survive well in water that is too hard or soft.  Each species thrive in slightly different hardness ranging from 3 to 15dH.

Why do we test water temperature?
Temperature is another important factor affecting the shrimps.  The ideal temperature is slightly lower than the tropical temperature of around 20 to 25oC.  Depending on the species, they will not survive above these ranges without strong aeration and non-overcrowding.  Temperature swings will cause mare casualties.

Advanced features:

One-Touch Calibration
Effortless calibration with a single press of the button.  Always calibrate accurately!

Automatic Endpoint Reading & Calibration
Eliminates guesswork!  The unit automatically locks to an endpoint reading during each test and calibration.

Beep Function
Audible beep on every press of the button and long beep on every completed function and end-point reading.

Technical Specification

Technical Specification

  Specifications

Model:
Crystal Shrimp Pro - CSP
Range:
0 to 500ppm        0 to 50 °C
Resolution:
1 ppm                    0.1 °C
Accuracy:
± 5ppm                  ± 0.5 °C
Battery Type:
4 x 1.5V button cell (Alkaline A76 or equivalent)
Battery Life:
Approx. 100 hours
Automatic Shut-off:
Approx. 15 minutes
Operating Temperature:
0 to 50°C or 32 to 122°F
Packaging Dimension Size (LxWxH):
185mm x 65mm x 25mm
Packaging Weight:
Approx. 135gm
Product Dimension Size (LxWxH):
170mm x 32mm x 15mm
Product Weight:
Approx. 70gm
Click to download Instructions Manual

Optional Accessories

Optional Accessories

1.  ST1382N - CAL 1382ppm Standard TDS Solution - 90ml
2.  VXLR44Q - Button Cell Battery LR44 -1.5 volts (In packs of 4pcs)